One of the most preferred comforts that have been brought by modern technology to the human race is hot water service. This is a comfortable and awesome experience to have a hot water shower to bath on a cold morning after waking up from bed. This helps in waking up a drowsy body and mind. This also helps in cleaning your skin by effectively removing excess dirt and oil. Because of the several benefits that the same provides, people are willing to spend their money for receiving a convenient supply of hot water in their house for generations.
Useful Tips for A Hot Water Service Installation
Here are a few useful tips for installing hot water system installation and its repair if you someday require these services.
Choose The Right Hot Water System -While installing a brand-new hot water system, firstly you must choose the right one suitable for your need. The hot water service can either be gas-fueled or electric-operated. Sometimes, an electric-operated hot water system can cost much lesser and for that, you have to check the energy ratings while purchasing the same. If your building does not have a gas supply service, then the most reasonable option left is an electric-operated hot water system.
The Right Measurement Is Paramount - You also need to thoroughly check the dimensions of the cold and hot pipes that exist in your house and ensure that the new hot water service appliance is a right and adaptable fit. Depending on your house’s age, you may need to purchase certain couplers to fit the pipes properly.
Turn Off the Utility Supply Before Installation - Before you opt to do anything, you need to ensure that you turn off all the utilities attached to the unit, no matter electric or gas. Once that is turned off, you have the option of draining the hot water tank and then disconnect the old cold and hot water pipeline connection. In order to drain the water from the tank, you necessarily need to hook up a hose to the outlet towards the tank’s bottom side and then drain the water outside.
When the old unit is completely drained of water and then successfully disconnected, you may have to remove the same to make the desired space for the new unit. The next step is to install any fittings to the new unit and the pressure, and the temperature relief valve is to be fitted for adequate safety.
Proper Connection of Water Lines - Then the water lines are to be properly connected following the right procedures so that there are no further leakages while filling the new tank. The next step is to connect to the right power source that may be either electric or gas line. If the fuel source happens to be a gas line, you would require attaching the flue vent to ensure fumes are directed properly, leading to a way out of the house. After making all the connections, you can fill up the hot water tank with cold water and then switch on the new unit.
This is a great idea for insulating the hot water tank along with a water heater tank blanket. This particular step can very effectively lower the power costs as retain the water in the heated condition for a longer time.
Conclusion
While you can install a new hot water service unit yourself, but we would not recommend taking up the charge unless you are confident about the work. For a better and hassle-free installation, hiring a plumbing professional is the wisest approach to adopt that would save a lot of your valuable money and time. Make sure that you hire only a trained and qualified professional for this task.
.jpg)
0 Comments