If you are decorating
your own kitchen, then it is always handy to flip over a few tips when it comes
to the choice of sink. With the kitchen decorations there should be little
space for errors, as correcting them can also prove to be a costly affair. With
stainless steel sinks, you get the
benefit of having something that sustains in the long run and that works well
in a rough and tough environment like the kitchen and is easy to clean too. So
here are some tips to keep in mind when selecting the same-
Stainless Steel Sinks |
- Budget
The budget constraint
should always be maintained, as there is no end to the expenses on the sinks.
There are products, which can really tempt you, but it is always advised for
settling for stainless steel sinks that are within your budget. When you are
planning to change the sink or redecorating you should also look out for some
good deals on the internet or at sales also.
- Gauge
One of the most vital
factors here is that you should chose a stainless steel sink gauge that helps you understand the
strength of the metal. Basically it means that if you have a higher gauge then
it will be thinner but also less strong. However, a lower gauge may be more
expensive. In such cases, you should opt for a gauge that is ideally less than
22. Something that is too thin would tend to vibrate and bend too. This also
increases the risks of damages. 16 and 18-gauge sinks are ideal for homes. It
is better if you talk to ace designers, for installing the gauge and to reduce
the rate of damage to your sinks.
- Depth
Another factor that
is crucial when it comes to the stainless steel sinks would be the depth of the
sinks. Most of these sinks have a depth of 6 inches, but that is not really
enough to manage and hold all of your dishes. You should opt for something that
is deep enough to permit your washing factor, but not so high that your pile of
dishes keeps falling off from the sink. You should opt for 9-10 inches of depth
for these sinks, especially if you are 3-4 people living in an apartment or
home. Unless, there is a commercial purpose in mind, you don’t have to worry
about further depth.
Stainless Steel Sinks |
- Invest in easy to clean designs
There are a lot of
different kinds of designs available but you should pick something that has the
cleanest of the edges, and least of folds. This would make it much easier for you
to clean in the long run. In particular, if your sink is used several times a
day, go for a plain design.
- Undercoating Material
Most people are just
happy seeing the stainless steel sinks
on the top. What they don’t realize is that the undercoating material is also a
crucial aspect. The material used on the bottom of these sinks would be a
contributing factor when it comes to the muffle and the noise. It also gives
protection against condensation along with maintaining the temperature of the
water in the same. Something with latex spray works best.
- Right Size
Don’t just go by the
size that the store-owner tells you. You should measure the sink and get the
accurate size. Getting a sink that is either too big or small is going to be a
menace for you. Don’t measure the business area along, you should measure stainless
steel sinks outer ream too because
that is the precise size for your kitchen.
If you want to know more about stainless steel sinks, then go through link to get more ideas about good commercial kitchen sink
designs.
0 Comments